Aston Martin Valkyrie AMR Pro 2023 for sale – 38 out of 40 units – immediately available at Autoropa in Arlöv (Sweden) – Price: €5,500,000 ($5,867,500 / £4,725,000).
Initially presented in 2018 at the Geneva Motor Show, the Aston Martin Valkyrie AMR Pro represents the culmination of a technical partnership between Aston Martin and the Red Bull Racing team, under the direction of the AM-RB 002 project. Developed from the road-homologated standard Valkyrie, the AMR Pro stands out with a design exclusively oriented for circuit use.
The hypercar offered by Autoropa in Arlöv (Sweden) is number 38 out of the 40 units produced. It displays 0 km on the odometer and is presented in brand-new condition, immediately available in the showroom located at Testvägen 18, 232 37 Arlöv, near Malmö. This Aston Martin Valkyrie AMR Pro features a body painted in “Aston Martin F1 Racing Green,” an exclusive shade from the special Aston Martin Racing palette, enhanced by a F1 signature livery specific to the AMR Pro series. The exterior is distinguished by its 18-inch Satin Black magnesium wheels, equipped with aero-discs optimizing aerodynamic flow at high speeds.
Inside, the cabin is fully covered in black Alcantara fabric, featuring contrasting Lime finish elements, notably on the internal door handles. The seats benefit from a specific treatment called “Deboss seat pad finish”, a characteristic unique to this series.
The initial value of the Aston Martin Valkyrie AMR Pro, when it was first marketed new, was approximately €3.5 million before taxes ($3,798,000 or £2,941,000). Today, offered at €5,500,000 before taxes ($5,967,000 or £4,621,000) by Autoropa Arlöv Försäljning och Service, its valuation reflects a significant appreciation due to its extreme rarity.
Aston Martin Valkyrie AMR Pro – For sale
The Aston Martin Valkyrie AMR Pro is equipped with a 6.5-liter naturally aspirated V12. Entirely developed by Cosworth, this powertrain delivers more than 1,000 horsepower for a total weight of 1,000 kg, giving it a power-to-weight ratio greater than 1 hp per kilogram, comparable to the best endurance racing cars in the LMP1 category or even to current Formula 1 cars. The power is transmitted via a sequential gearbox specifically designed for intensive track driving.
🛠️ Aston Martin Valkyrie AMR Pro – complete Technical Sheet –(2023)
🟢 Motorization & Powertrain- Type of engine: 6.5L naturally aspirated V12
- Manufacturer: Cosworth
- Engine configuration: 65° V12
- Exact displacement: 6,498 cm³ (95 mm × 85.9 mm bore/stroke)
- Compression ratio: 12.5:1
- Maximum power: 1,015 hp (746 kW) at 11,100 rpm
- Maximum torque: 740 Nm at 7,000 rpm
- Maximum engine speed: 11,100 rpm
- Fuel system: Cosworth multipoint injection
- Valve train: 48 valves (4 per cylinder)
- Lubrication: Dry sump
- Engine weight: Approx. 206 kg
- Hybrid system: None (removed to reduce weight)
- Exhaust: Titanium exhaust line with rear central exit
🟢 Transmission- Gearbox: 7-speed sequential Ricardo
- Clutch: Single-disc carbon fiber
- Gear selection: Paddle shifters with auto-blip
- Drivetrain: Rear-wheel drive (RWD)
- Start system: 48V electric system reducing clutch wear
🟢 Detailed Performance- Top speed: Over 350 km/h
- 0-100 km/h: Less than 2.5 seconds
- 0-200 km/h: Estimated under 6 seconds
- Power-to-weight ratio: 0.99 kg/hp
- Maximum aerodynamic downforce: 2,000 kg
- Lateral acceleration (G): Up to 3.3 G in corners
🟢 Chassis & Suspension- Structure: Carbon fiber monocoque developed by Multimatic
- Aerodynamics: Passive with optimized downforce
- Chassis length: +38 cm compared to standard Valkyrie
- Track width: Widened to improve stability and grip
- Suspension type: Double wishbone with push-rod dampers
- Shock absorbers: Adjustable, competition specifications
🟢 Aerodynamics & Bodywork- Materials: Full carbon fiber construction
- Active aerodynamics: No (fully optimized passive aerodynamics)
- Front splitter: Enlarged to enhance aerodynamic downforce
- Rear wing: Large fixed wing optimized for high speed
- Rear diffuser: Extended to maximize ground effect
- Central vertical fin: For increased yaw stability at high speeds
🟢 Dimensions & Weight- Dry weight: ~1,000 kg
- Weight distribution: 49% front / 51% rear
- Overall length: Approx. 5,000 mm
- Overall width: Approx. 2,000 mm
- Overall height: Less than 1,100 mm
- Wheelbase: +30 cm compared to standard Valkyrie
- Ground clearance: Adjustable, specifically tuned for track use
🟢 Braking & Safety- Braking system: Carbon-ceramic racing discs
- Calipers: 6-piston monoblock
- ABS: Competition calibration, track-optimized
- Traction control: Adjustable according to track conditions
- Tires: Michelin Racing slicks specific to AMR Pro
- Wheels: 18-inch magnesium Satin Black with Aero-discs
- Safety harness: FIA 6-point racing harness
🟢 Technology & Electronics- Onboard telemetry: Real-time data analysis (tire pressure, temperatures, lap performance)
- Mirrors: Rear cameras with cockpit display
- Driving modes: Track calibration only
- Launch Control: Present, optimized for maximum track grip
- Anti-Lag System: Not applicable (naturally aspirated engine)
🟢 Production & Maintenance- Production year: 2023
- Number of units produced: 40 units worldwide
- Maintenance intervals: Specific maintenance based on track use
- Known recalls: No recalls reported to date
- Estimated maintenance costs: High, specific to track use and high-performance fuel
Specific Features of Aston Martin Valkyrie AMR Pro No. 38/40
🔹 Interior about this Aston Martin Valkyrie AMR Pro – 38/40
• Materials and finishes:- Cabin fully covered in matte black Alcantara.
- Contrasting Lime (acid green) interior finishes, notably on the inner door handles.
- Exposed carbon fiber inserts to optimize weight.
• Seats:- Ultra-lightweight fixed carbon fiber bucket seats with specific “Deboss seat pad finish”.
- Minimalistic manual adjustment to adapt the driver’s position to the owner’s morphology.
- No heating or ventilation to reduce total weight.
• Onboard technology:- High-definition digital dashboard with competition-oriented instrumentation (lap times, detailed telemetry, engine and brake temperatures, tire pressure).
- Formula 1-inspired multifunction steering wheel with direct controls for dynamic settings.
- Integrated radio communication system for track use, compatible with professional telemetry systems.
- No multimedia or onboard audio system to prioritize lightweight construction and performance.
🔹 Exterior about this Aston Martin Valkyrie AMR Pro – 38/40
• Paint and finishes:- Exclusive color: “Aston Martin F1 Racing Green”, specific to the AMR range.
- Distinctive exterior livery called “F1 Signature Livery”, developed by the Aston Martin Racing competition department, integrating graphic elements reminiscent of the official Formula 1 Aston Martin Racing livery.
- Bodywork finish combining special paint and exposed carbon fiber aerodynamic elements.
• Specific aerodynamic elements:- Large fixed carbon fiber rear wing, designed for maximum aerodynamic downforce at high speed.
- Oversized front splitter optimizing front axle downforce for improved grip in fast corners.
- Fully carbon fiber rear diffuser, optimized for maximum high-speed stability.
- Aero-discs mounted on ultra-lightweight 18-inch magnesium wheels in Satin Black finish, reducing aerodynamic drag on the wheels.
Aston Martin Valkyrie AMR Pro for sale - LUSSO
🔹 Seller Information & Practical Details
• Official Dealer:- Autoropa Arlöv Försäljning och Service
- Address: Testvägen 18, 232 37 Arlöv, Sweden (near Malmö)
• Warranty:- Brand-new vehicle, never driven, covered by the original Aston Martin manufacturer warranty.
• Financing Options:- Full payment only.
- VAT refundable (price shown excluding tax).
• International Delivery:- International delivery available, to be arranged directly with Autoropa.
- Shipping costs and administrative procedures are the buyer’s responsibility.
Luxury car broker – LUSSO
LUSSO, based in Andorra, offers a personalized luxury car search service. We assist our clients in finding their hypercar or supercar based on their criteria. Being located in Andorra allows us to provide tailored support while ensuring discretion, so our clients can take full advantage of the country’s specific benefits…
Why register your luxury car in Andorra?
Andorra’s Tax and Registration Advantages for Luxury Cars
Reduced VAT- VAT rate of only 4.5%, significantly lower than the 20% applied in countries like the UK or France.
Limited Administrative Fees- Registration Fee: €200
- Automobile Club License Plates: €60
- Yellow Card (Registration Document): Maximum €361.50, covering:
- Fiscal horsepower tax.
- CO₂ emissions tax.
- Total Administrative Fees: Approximately €621.50.
Simplified Registration Process- Fast and efficient procedures managed by our team of experts in Andorra.
Significant Savings- Substantial cost reductions, allowing you to invest in maintenance, customization, or upgrades for your luxury vehicle.
Photo credits:©Autoropa Arlöv Försäljning och Service
Laisser un commentaire